SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jibs
Industrial Jibs - The lift truck jib would enable a worker to transfer their very heavy loads overtop of obstructions or obstacles on roofs, elevated platforms, and decks. They could be used in order to reach the second and third level building platforms in order to transfer or pick up loads at places which are still under construction. Fork truck jibs are utilized in order to deliver trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are also often utilized for reaching over scaffolding for masonry work.
Each and every forklift jib attachment is equipped with two revolving hooks. One of the hooks could be manually connected on the base of the boom at whichever position whereas the second hook remains fixed at the end of the jib. This enables the person operating it to carry things which have two hook points. Dependent upon the dimensions of the model, every hook is rated at either 4 thousand or 6 thousand pounds It's possible to use either one hook or even both in order to lift a load. The individual operating it must be certain that the entire weight of the jib and the load will not exceed the rated capacity of the jib as shown on the load chart for that retracted or extended position.
Jib accessories are made so as to be used on industrial forklifts, extendable-reach lift trucks, or even on rough terrain straight-mast lift trucks. Forklift jib cranes install onto the forklift by inserting both forks into the fork pockets. The rear of the jib crane then seats towards the back of the fork and a safety chain wraps the forklift carriage to hold it into place.
Jib Boom Forklift Attachment Load Capacity
The maximum load capacity intended for forklift jibs in both the retracted or extended positions vary starting from 1935 lbs to as much as 6000 lbs. It's a good suggestion to ask a material handling specialist concerning the restrictions for your specific use. The load capacity ratings are intended for the jib itself and not the forklift or even the maximum load that can be moved safely utilizing a certain lift truck. It is essential to remember that at any time when any attachments such as a lift truck jib are connected to the forklift, the new center of gravity made by the attachment would lessen the general lift capability of the forklift. There are directions accessible which offer details on the way to properly gauge these load limits.
Fork Trucks & Fork lift Attachment Safe Usage
Previous to making use of a forklift jib, make sure that it is well secured to the lift truck using hooks and shackles. Continuously be sure to be able to verify that the screw pins are tight. It is vital to even double check that the weight calculations have been made properly. Remember to consider the truth that rated capacities sometimes lessen whenever the boom is in an elevated position, whenever the boom is extended with telehandlers or even each time the mast is slanted forward.
Important tips every time you are using an adjustable jib is to never pull a load using this sort of accessory. These kinds of attachments are really just used for vertical lifting. In addition, avoid letting the load sway. Use extreme caution each time a load is carried to prevent tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 707-561-8021
55 SPRINGSTOWNE CTR 277
Vallejo, California
forkliftpartsvallejo.com
Email Us
About Us